In the actual operation and use of self loading mixer, material blockage may occur due to some reasons. To a certain extent, it can directly affect the construction efficiency of mixer truck. Please tell me some ways to avoid it.

1.不合理的裝卸時間參數

1. Unreasonable handling time parameters

該行業基本上是時間控制的，因為自動進料器無法為料倉配備矯平機。設置時間參數，加載和卸載時間實際上非常容易。初次使用時，請先設置少量時間，然后在每個抽吸位置緩慢增加，并在物料水平達到抽吸釋放時間時減去。 1秒是一個合理的時間。排出時間是為了確保排出物料并添加額外的1秒。這有兩個優點。一種是材料水平過高而不會嚴重損壞濾芯。這使某些客戶可以使用濾芯兩年半。其次，您可以每次清洗材料。關閉進料閥可消除物料截止閥。材料截止閥會嚴重損壞頻繁運行的密封圈，該密封圈每分鐘打開和關閉5至6次。

The industry is basically time controlled because automatic feeders cannot be equipped with levelers for bins. Setting time parameters, loading and unloading time is actually very easy. For initial use, set a small amount of time, then slowly increase at each suction position, and subtract when the material level reaches the suction release time. One second is a reasonable time. The discharge time is to ensure that the material is discharged and an additional 1 second is added. This has two advantages. One is that the material level is too high to seriously damage the filter element. This allows some customers to use the filter element for two and a half years. Second, you can clean the material each time. Close the feed valve to eliminate the material stop valve. The material stop valve will seriously damage the seal ring which is frequently operated, and the seal ring will open and close 5 to 6 times per minute.

2.自動攪拌車上料口的進料量是否合適？

2. Is the feeding rate of the feeding port of the automatic feeding mixer suitable?

我們的許多項目都使用手動物料槍來吸取物料。將物料槍直接插入物料桶或噸袋中，以便于操作。物料槍的物料吸入口被固體物料壓縮，強大的負壓將整個物料拉開。冒口極其有害，很容易堵塞管道。正確的方法是使物料在吸入口與空氣形成特定的空氣與物料的混合比，并在氣流的推動下均勻地流入給料機。此時，有必要設計一種具有補氣功能的材料槍。如果物料積壓太長，可能會非常困難。這時，有必要在槍上安裝振蕩器，以破壞結塊的材料。

Many of our projects use manual material guns to suck materials. Insert the material gun directly into the material barrel or ton bag for easy operation. The material inlet of material gun is compressed by solid material, and the whole material is pulled apart by strong negative pressure. Risers are extremely harmful and can easily clog pipes. The correct way is to make the material form a specific mixing ratio of air and material with air at the suction port, and flow into the feeder evenly under the push of air flow. At this time, it is necessary to design a kind of material gun with air supply function. If the material backlog is too long, it can be very difficult. At this time, it is necessary to install an oscillator on the gun to destroy the caked material.

在自動上料攪拌機的實際操作中，不可避免地會出現某些障礙。特別是，物料堵塞很嚴重，因此，我想讓您了解如何使用上述自動進料混合機防止物料堵塞，然后執行正確合理的操作。

In the actual operation of automatic feeding mixer, there will inevitably be some obstacles. In particular, material blockage is very serious. Therefore, I want you to know how to use the automatic feed mixer mentioned above to prevent material blockage, and then carry out correct and reasonable operation.

今天是小編給大家介紹的自上料水泥攪拌車內容，更多的精彩內容請詳細的關注我們的網站：http://www.top2010.cn，后續內容我們會定期的進行更新!

Today is the content of Zhongke Jufeng concrete mixer introduced by Xiaobian. For more wonderful content, please pay more attention to our website: http://www.top2010.cn We will update the follow-up content regularly!